Hotpoint Clothes Dryer TVFM60C FUTURA User Manual

Instruction booklet  
TUMBLE DRYER  
Contents  
GB  
GB  
Important information, 2  
English  
Installation, 3-4  
Where to put your dryer  
Ventilation  
Electrical connection  
Levelling your dryer  
Before you start using your dryer  
Dryer description, 5  
The front  
The back  
Control panel  
Start and programmes, 6  
Choosing a programme  
TVFM 60C Futura  
Laundry, 7-8  
Sorting your laundry  
Wash care labels  
Special clothing items  
Drying times  
Warnings and Suggestions, 9  
General safety  
Saving energy and respecting the environment  
Maintenance and Care, 10  
Switching off the electricity  
Cleaning the filter after each cycle  
Check the drum after each cycle  
Cleaning the dryer  
Troubleshooting, 11  
Service, 12  
Disposal  
Hotpoint Guarantee, 15  
Hotpoint After Sales Service, 16  
! Keep this instruction booklet on hand in order to refer to it when necessary. Take it with you when you move, and  
should you sell this appliance or pass it on to another party, make sure that this booklet is supplied along with the  
dryer so that the new owner may be informed about warnings and suggestions on how the appliance works.  
! Read these instructions carefully; the following pages contain important information on installation and suggestions  
on how the appliance works.  
This symbol reminds you to read this booklet.  
1
 
Installation  
Permanent venting  
Where to put your dryer  
GB  
In conjunction with the vent tube we recommend  
using a Wall/Window Vent Kit, available at a retail  
location or the nearest Spare Parts Dealer.  
Place your dryer at a distance from gas ranges,  
stoves, heaters, or cook tops because flames can  
damage the appliance.  
If you are going to install the  
Minimum gap 10mm  
Wall mounting  
appliance under a work  
1. Leave an opening in  
the wall to the left of the  
dryers proposed position.  
2. Keep the tube as short  
and straight as possible  
to prevent condensed  
moisture from backing up  
into the dryer.  
3. Similarly, the duct in  
the wall should slope  
downwards towards the  
outside.  
counter, be sure to leave a  
10mm space between the  
top and any other objects on  
or above the machine and a  
15mm space between the  
sides and lateral furnishings  
Minimum gaps  
15mm  
or walls. This is to ensure  
proper air circulation. Make sure that the back  
vents are not obstructed.  
Make sure you put your dryer in an environment  
that is not damp and has proper air circulation  
throughout, the dryer will not operate efficiently in  
an enclosed space or cupboard.  
Window mounting  
1. With a stacked dryer  
the hole in the window  
should ideally be made  
below the vent.  
! We do not recommend that the dryer is installed in a  
cupboard but the dryer must never be installed  
behind a lockable door, a sliding door or a door with a  
hinge on the opposite side to that of the dryer door.  
2. The tube should be  
kept as short as possible.  
Ventilation  
The Dryer dries your laundry by drawing in cool, clean  
and relatively dry air, heating it, and then distributing it  
through the clothes as they are gently tumbled. For  
optimum performance, the moist air is then blown out  
through a vent tube at the back of the dryer.  
When the dryer is in use, there has to be adequate  
ventilation to avoid the back flow of gases into the room  
from appliances burning other fuels, including open fires.  
Depending on how often you use your dryer, it is  
essential that areas A and B are checked periodically  
to remove lint or debris.  
The vent tube adaptor must be fitted securely thus  
preventing any humid air from being emitted back into  
the room.  
! The Dryer should not be pushed so far back that the  
tube adaptor is pulled out of position or the tube is  
squashed or bent.  
Mobile venting  
! The tube should be kept clear of the air intake vent  
and kinks or ‘U’ bends must be avoided as these will  
obstruct the tube or trap condensation.  
A vent tube must always be fitted when the dryer is  
used in conjunction with Mobile Venting.  
The tube must be fitted securely into the back of the  
dryer (see Dryer Description). If possible, it is always  
best to connect the tube to a permanent  
outlet close to the dryer. If permanent installation is  
not possible, the dryer will work just as well with the  
tube passing through a partly-opened window.  
! Ensure that the end of the tube is not directed  
toward the air intake vent at the rear of the dryer.  
! The vent tube should not exceed 2.4 metres in  
length and should be kept free of any possible  
accumulation of fluff, lint and water by shaking it out  
frequently. Always ensure that the tube is not  
squashed.  
3
 
Installation  
Open window venting  
Moulded plug  
GB  
The end of the tube  
! The plug must not be used  
without the fuse cover in place. If  
a replacement fuse holder/cover is  
required, it must be of the same  
colour coding or wording as  
shown on the base of the plug.  
Replacements are available from  
authorised dealers.  
should be directed  
downwards, to prevent  
warm moist air from  
condensing in the room or  
in the dryer.  
Changing the plug  
The wires in the power cord are coloured in accordance  
with the following:  
Green and Yellow  
(Earth) wire to terminal  
! Ensure that the dryer is adequately ventilated and  
that the end of the vent tube is not directed towards  
the air intake duct.  
marked ‘E’, symbol  
or coloured green and  
yellow.  
,
! The vent tube must always be fitted for optimum  
performance.  
! Make sure that the vent tube and air intake vents are  
not obstructed or blocked.  
! The dryer must not recycle exhaust air.  
! Misusing a tumble dryer may create a fire hazard.  
! Do not discharge exhaust air into a flue which is  
used for exhaust fumes from other appliances that  
burn gas or other fuels.  
! Do not discharge exhaust air into an extraction  
system or any duct with an extractor fan. This will  
affect the way the thermal controls operate and can  
result in a fire hazard.  
13A ASTA approved  
fuse to BS1362.  
Blue (Neutral) wire to  
terminal marked ‘N’ or  
coloured black.  
Brown (Live) wire to  
terminal marked ‘L’ or  
coloured red.  
Cord clamp  
! If the plug being replaced is a non-rewirable type,  
then the cut-off plug must be disposed of safely. DO  
NOT leave it where it can be inserted into a socket  
and create a shock hazard.  
! The power supply cord should be checked periodically  
and replaced by a cord specially prepared for this  
dryer and fitted only by authorised technicians (see  
Service). New or longer power cords are supplied at  
an extra charge by authorised dealers.  
Electrical connections  
! The manufacturer denies any responsibility should  
any of these rules not be followed.  
! If in doubt about any of the above consult a qualified  
electrician.  
Make sure of the following before you insert the plug  
into the the electrical socket:  
The socket must be grounded.  
The socket must be able to sustain the machines  
maximum power, which is indicated on the rating  
label (see Dryer Description).  
Levelling your dryer  
The dryer must be installed level for correct operation.  
When you have installed your  
dryer in its final location check  
that it is level first side to side,  
then front to back.  
Power voltage must be within the values indicated  
on the rating label (see Dryer Description).  
The socket must be compatible with the dryers  
plug. Should this not be the case, replace the  
plug or the socket.  
! The dryer must not be installed outdoors, even if the  
space is sheltered. It can be very dangerous if it is  
exposed to rain or storms.  
! Once installed, the dryers electrical wire and plug  
must be within easy reach.  
If the dryer is not level, use a  
wooden block to  
support it while adjusting the two  
front legs up or down, until your  
dryer is level.  
! Do not use extension cords.  
! The power cord must not be bent or squashed.  
! The power cord supplied is fitted with a BS1363 plug  
and a 13 amp BS1362 fuse. If you need to replace the  
fuse, use only those rated at 13 amp (13A) and ASTA  
approved to BS1362.  
Before you start using your dryer  
Once you have installed your dryer and before you  
use it, clean the inside of the drum to remove any dust  
that could have accumulated during transport.  
4
 
Dryer Description  
The front  
The back  
GB  
Drum  
Model & Serial numbers  
Control Panel  
Air Intake Vent  
Rating plate  
Vent Tube fitted here  
Filter  
Caution: Hot!  
Control panel  
Indicator  
TIMER  
Knob  
START  
Button  
HEAT  
Button  
The START button begins drying a selected  
programme (see Start and Programmes).  
The TIMER knob sets the drying time: rotate it clockwise,  
never counter-clockwise, until the indicator is pointing  
to the drying time you want to select (see Start and  
Programmes).  
The HEAT button selects drying temperature (see  
Start and Programmes).  
OUT: LOW heat  
IN: HIGH heat  
5
 
Start and Programmes  
Choosing a programme  
6. Press the START button to begin.  
GB  
During the drying programme, you can check on  
your laundry and take out items that are dry  
while others continue drying. When you close  
the door again, press the START button in order  
to resume drying.  
1. Plug the dryer into the electrical socket.  
2. Sort your laundry according to fabric type (see  
Laundry).  
3. Open the door and make sure the filter is clean  
7. About 10 minutes before the programme is  
completed, it enters the final COOL TUMBLE  
phase (fabrics are cooled), which should always  
be allowed to complete.  
and in place (see Maintenance).  
4. Load the machine and make sure items are not  
in the way of the door seal. Close the door.  
8. Open the door, take the laundry out, clean the  
5. Choose the drying time by checking the Drying  
Guide table for the type of fabric you are drying  
(see Laundry).  
filter and replace it (see Maintenance).  
9. Unplug the dryer.  
- Set the temperature with the HEAT button.  
- Select a drying time by rotating the TIMER knob  
clockwise.  
6
 
Laundry  
Sorting your laundry  
Wash Care Labels  
GB  
Check symbols on clothing labels to make sure  
that the articles can be tumble dried.  
Sort laundry by fabric type.  
Empty pockets and check buttons.  
Close zippers and hooks and tie loose belts and  
strings.  
Wring out each item in order to eliminate as much  
excess water as possible.  
Look at the labels on your garments, especially when  
tumble drying for the first time. The following symbols  
are the most common:  
May be tumble dried  
Do not tumble dry  
! Do not load dripping wet clothes into the dryer.  
Tumble dry at high heat setting  
Tumble dry at low heat setting  
Maximum load size  
Do not load more than maximum capacity.  
These numbers refer to dry weight:  
Natural fibres: 6kg max (13lb)  
Synthetic fibres: 3kg max (6.6lb)  
Items not suitable for tumble drying  
Articles that containing rubber or rubber-like  
materials or plastic film (pillows, cushions, or PVC  
rainwear), any other flammable articles or objects  
that contain flammable substances (towels soiled  
with hair spray).  
Glass fibres (certain types of draperies)  
Items which have been dry cleaned  
! DO NOT overload the dryer as this could result in  
reduced drying performance.  
Typical load  
Note: 1kg = 1000g  
(1lb = 16oz)  
150g  
Items with the ITCL Code  
(see Special  
Clothes  
clothing items). These can be cleaned with special  
at-home dry cleaning products. Follow instructions  
carefully.  
Large bulky items (quilts, sleeping bags, pillows,  
cushions, large bedspreads etc). These expand  
when drying and would prevent airflow through  
the dryer.  
Blouse  
Cotton  
(5oz)  
Other  
Cotton  
Other  
100g  
500g  
350g  
700g  
(3oz)  
Dress  
(1lb 2oz)  
(12oz)  
(1lb 6oz)  
Jeans  
10 nappies  
Shirt  
1000g (2lb 3oz)  
Cotton  
Other  
300g  
200g  
125g  
(10oz)  
(7oz)  
(4oz)  
T-Shirt  
Household Items  
Duvet cover  
(Double)  
Cotton  
Other  
1500g (3lb 5oz)  
1000g (2lb 3oz)  
Large Tablecloth  
Small Tablecloth  
Tea Towel  
700g  
250g  
100g  
700g  
350g  
500g  
350g  
(1lb 6oz)  
(9oz)  
(3oz)  
Bath Towel  
(1lb 6oz)  
(12oz)  
Hand Towel  
Double Sheet  
Single Sheet  
(1lb 2oz)  
(12oz)  
At the end of a drying cycle, cottons could still be  
damp if you grouped cottons and synthetics together.  
If this happens simply give them an additional short  
period of drying.  
7
 
Laundry  
Special clothing items  
Times are approximate and can vary depending  
upon:  
GB  
Blankets and Bedspreads: acrylic items (Acilan,  
Courtelle, Orion, Dralon) must be dried with special  
care on LOW heat setting. Avoid drying for a long  
period of time.  
Amount of water retained in clothes after spin  
cycle: towels and delicates retain a lot of water.  
Fabrics: items that are the same type of fabric but  
Pleated or creased garments: read the manufacturer’s  
drying instructions on the garment.  
different textures and thicknesses may not have  
the same drying time.  
Starched articles: do not dry these with non-starched  
items. Make sure that as much of the starch solution is  
removed from the load as possible before placing it in  
the dryer. Do not over-dry: the starch will become  
powdery and leave your clothing limp, which defeats  
the purpose of starch.  
Quantity of laundry: single items or small loads  
may take longer to dry.  
Dryness: If you are going to iron some of your  
clothes, they can be taken out while still a bit  
damp. Others can be left longer if you need them  
to be completely dry.  
Heat setting.  
Drying times  
Room temperature: if the room where the dryer is  
The table below presents APPROXIMATE drying times  
in minutes. Weights refer to dry garments:  
located is cold, it will take longer for the dryer to  
dry your clothes.  
Bulk: some bulky items can be tumble dried with  
Cottons  
care. We suggest that you remove these items  
several times, shake them out, and return them to  
the dryer until finished.  
High (full) Heat  
Drying times 800-1000rpm in washing machine  
1kg  
2kg  
3kg  
4kg  
5kg  
6kg  
! Do not over-dry your clothes.  
20-30  
35-45  
45-60 60-70 70-80 80-100  
All fabrics contain a little natural moisture, which  
keeps them soft and fluffy.  
Synthetics  
High (full) Heat  
Drying times on reduced spin in washing machine  
1kg  
2kg  
3kg  
20-30  
35-45  
45-60  
Acrylics  
Low (gentle) Heat  
Drying times on reduced spin in washing machine  
1kg  
2kg  
25-40  
40-60  
8
 
Warnings and Suggestions  
To minimise the risk of fire in your tumble dryer, the  
! The appliance has been designed and built according  
to international safety standards.  
These warnings are given for safety reasons and must  
be followed carefully.  
GB  
following should be observed:  
Tumble dry items only if they have been washed with  
detergent and water, rinsed and been through the spin  
cycle. It is a fire hazard to dry items that HAVE NOT  
been washed with water.  
Do not dry garments that have been treated with  
General safety  
chemical products.  
Do not tumble dry items that have been spotted or  
This tumble dryer is not intended for use by  
soaked with vegetable or cooking oils, this constitutes a  
fire hazard. Oil-affected items can ignite spontaneously,  
especially when exposed to heat sources such as a tumble  
dryer. The items become warm, causing an oxidisation  
reaction with the oil, Oxidisation creates heat. If the heat  
cannot escape, items can become hot enough to catch  
fire. Piling, stacking or storing oil-effected items can prevent  
heat from escaping and so create a fire hazard.  
If it is unavoidable that fabrics containing vegetable or  
cooking oil or those that have been contaminated with  
hair care products be placed in a tumble dryer they should  
first be washed with extra detergent - this will reduce, but  
not eliminate the hazard. The cool tumble phase should  
be used to reduce the temperature of the items. They  
should not be removed from the dryer and piled or  
stacked while hot.  
persons (including children) with reduced physical,  
sensory or mental capabilities, or lack of experience  
and knowledge, unless they have been given  
supervision or instruction concerning use of the  
appliance by a person responsible for their safety.  
This tumble dryer has been designed for home,  
and not professional use.  
Do not touch the appliance while barefoot or with  
wet hands or feet.  
Unplug the machine by pulling on the plug, not  
the cord.  
Children must not be in proximity of the dryer  
when in use. After using the dryer, turn it off and  
unplug it. Keep the door closed to make sure that  
children do not use it as a toy.  
Children should be supervised to ensure that they  
do not play with the dryer.  
The appliance must be installed correctly and  
have proper ventilation. The air intake vents  
behind the machine, the outlet vents and the vent  
tube should never be obstructed (see Installation).  
Never direct the vent tube outlet towards the air  
intake at the back of the machine.  
Never allow the tumble dryer to recycle exhaust air.  
Never use the dryer on carpeting where the pile  
height would prevent air from entering the dryer  
from the base.  
Check to see if the dryer is empty before loading it.  
The back of the dryer could become very  
hot. Never touch it while in use.  
Do not use the dryer unless the filter is securely  
in place (see Maintenance).  
Do not overload the dryer (see Laundry) for  
maximum loads.  
Do not load items that are dripping wet.  
Carefully check all instructions on clothing labels  
(see Laundry).  
Do not tumble dry items that have previously been  
cleaned in or washed in, soaked in or soiled with  
petrol/gasoline, dry cleaning solvents or other flammable  
or explosive substances. Highly flammable substances  
commonly used in domestic environments including  
cooking oil, acetone, denatured alcohol, kerosene, spot  
removers, turpentine, waxes and wax removers. Ensure  
these items have been washed in hot water with an extra  
amount of detergent before being dried in the tumble dryer.  
Do not tumble dry items containing foam rubber (also  
known as latex foam), or similarly textured rubber like  
materials. Foam rubber materials can, when heated,  
produce fire by spontaneous combustion.  
Fabric softener or similar products should not be used in  
a tumble dryer to eliminate the effects of static electricity  
unless the practice is specifically recommended by the  
manufacturer of the fabric softener product.  
Do not tumble dry undergarments that contain metal  
reinforcements eg. bras with metal reinforcing wires.  
Damage to the tumble dryer can result if the metal  
reinforcements come loose during drying.  
Do not tumble dry rubber, plastic articles such as shower  
caps or babies waterproof covers, polythene or paper.  
Do not tumble dry rubber backed articles, clothes fitted  
with foam rubber pads, pillows, galoshes and rubber  
coated tennis shoes.  
Do not tumble dry large, very bulky items.  
Do not tumble dry acrylic fibres at high temperatures.  
Complete each programme with its Cool Tumble Phase.  
Do not turn off the dryer when there are still warm  
items inside.  
Clean the filter after each use (see Maintenance).  
Do not allow lint to collect around the dryer.  
Never climb on top of the dryer. It could result in  
damage.  
Always follow electrical standards and requirements  
(see Installation).  
Always buy original spare parts and accessories  
(see Service).  
Remove all objects from pockets, especially lighters  
(risk of explosion).  
! WARNING: Never stop the dryer before the end of the  
drying cycle unless all items are quickly removed and  
spread out so that the heat is dissipated.!  
Saving energy and respecting the  
environment  
Wring out items to eliminate excess water before  
tumble drying (if you use a washing machine first,  
select a high spin cycle). Doing this will save time  
and energy during drying.  
Always dry full loads - you save energy: single  
items or small loads take longer to dry.  
Clean the filter after each use to contain energy  
consumption costs (see Maintenance).  
9
 
Maintenance and Care  
Switching off the electricity  
Check the drum after each cycle  
GB  
Unplug your dryer when not using it, when cleaning it  
and during all maintenance operations.  
Turn the drum manually in order to remove small items  
(handkerchiefs) that could have been left behind.  
Cleaning the drum  
Clean the filter after each cycle  
! Do not use abrasives, steel wool or stainless steel  
The filter is an important part of your dryer:  
cleaning agents to clean the drum.  
it accumulates lint and fluff that is formed while drying.  
Small items could also become trapped in the filter.  
When finished drying, therefore, clean the filter by  
rinsing it under running water or with your vacuum  
cleaner. Should the filter become clogged up, the airflow  
inside the dryer will be seriously compromised: drying  
times lengthen and you will consume more energy. It  
may also damage your dryer.  
A coloured film may start to appear on the stainless  
steel drum, this may be caused by a combination of  
water and, or cleaning agents such as fabric conditioner  
from the wash. This coloured film will not affect the  
dryer performance.  
Cleaning  
The filter is found in front  
of the dryer trim  
External parts in metal or plastic and rubber parts  
(see diagram).  
can be cleaned with a damp cloth.  
Periodically check the vent tube and any  
permanent venting fixture to make sure that there  
has been no accumulation of fluff or lint, and  
remove it.  
Remove lint that collects around the filter and the  
outlet vents.  
Removing the filter:  
1. Pull the plastic grip of  
the filter upwards (see  
diagram).  
! Do not use solvents or abrasives.  
! Your dryer uses special bearing components which  
do not need lubrication.  
! Have your dryer checked regularly by authorised  
technicians to ensure electrical and mechanical safety  
(see Service).  
2. Open the filter and clean the lint from  
the inside.  
3. Replace it correctly. Ensure the filter is fully located  
flush into the tumble dryer trim.  
4. Remove any lint that has built up on the inside of the  
door and around the door seal.  
! Do not use the dryer without replacing the filter.  
10  
 
Troubleshooting  
One day your dryer seems not to be working. Before you call your Service Centre (see Service), go through the  
following troubleshooting suggestions:  
GB  
Problem:  
Possible causes / Solution:  
The dryer won’t start.  
The plug is not plugged into the socket, or not making contact.  
There has been a power failure.  
The fuse has blown. Try to plug another appliance into the socket.  
You are using an extension cord? Try to plug the dryer’s power cord  
directly into the socket.  
The TIMER knob has not been set properly (see Start and Programmes).  
The START button has not been pressed (see Start and Programmes).  
The START button was pressed with the door open. Make sure the door is  
closed before pressing the START button (see Start and Programmes).  
! If the START button is pressed with the door open the dryer will not  
start. Close the door, wait for a few seconds and then press the START  
button again (see Start and Programmes).  
It is taking a long time to dry.  
The filter has not been cleaned (see Maintenance).  
The temperature setting is not ideal for the type of fabric you are drying  
(see Start and Programmes).  
The correct programme has not been selected for the load (see Start  
and Programmes).  
The flexible vent tube is obstructed (see Installation).  
The air intake vent is obstructed (see Installation).  
The permanent ventilation flap on the storm cover is obstructed (see  
Installation).  
The items were too wet (see Laundry).  
The dryer was overloaded (see Laundry).  
11  
 
Service  
Before calling the Service Centre:  
Spare Parts  
GB  
Use the troubleshooting guide to see if you can  
solve the problem yourself (see Troubleshooting).  
If not, turn off the dryer and call the Service Centre  
closest to you.  
This dryer is a complex machine. Repairing it yourself  
or having a non-authorised person try to repair it could  
cause harm to one or more persons, could damage  
the machine and could invalidate the spare parts  
warranty.  
What to tell the Service Centre:  
Call an authorised technician if you experience problems  
while using the machine.  
name, address and post code.  
telephone number.  
the type of problem.  
the date of purchase.  
the appliance model (Mod.).  
the serial number (S/N).  
This information can be found on the data label inside  
the door of the machine.  
Recycling and Disposal Information  
As part of our continued commitment to helping  
the environment, we reserve the right to use  
quality recycled components to keep down customer  
costs and minimise material wastage.  
Disposal of old electrical appliances  
The European Directive 2002/96/EC on Waste Electrical  
and Electronic Equipment (WEEE), requires that old  
household electrical appliances must not be disposed  
of in the normal unsorted municipal waste stream. Old  
appliances must be collected separately in order to  
optimise the recovery and recycling of the materials  
they contain and reduce the impact on human health  
and the environment.  
Disposing of the packaging material: follow local  
regulations, so the packaging can be recycled.  
To minimise risk of injury to children, remove the  
door and plug - then cut off mains cable, flush  
with the appliance. Dispose of these parts separately  
to ensure that the appliance can no longer be  
plugged into a mains socket.  
The crossed out “wheeled bin” symbol on the  
product reminds you of your obligation, that  
when you dispose of the appliance it must be  
separately collected.  
Consumers should contact their local authority or  
retailer for information concerning the correct disposal  
of their old appliance.  
This appliance conforms to the following EC Directives:  
- 2006/95/EC (Low Voltage Equipment)  
- 89/336/EEC, 92/31/EEC and 93/68/EEC (Electromagnetic Compatibility)  
12  
 
13  
 
14  
 
Guarantee  
12 months Parts and Labour Guarantee  
Your appliance has the benefit of our manufacturers’ guarantee, which covers the cost of  
breakdown repairs for twelve months from the date of purchase.  
This gives you the reassurance that if, within that time, your appliance is proven to be  
defective because of either workmanship or materials, we will, at our discretion, either  
repair or replace the appliance at no cost to you.  
The guarantee is subject to the following conditions:  
- The appliance has been installed and operated correctly and in accordance with our  
operating and maintenance instructions.  
- The appliance is only used on the electricity or gas supply printed on the rating plate.  
- The appliance has been used for normal domestic purposes only.  
- The appliance has not been altered, serviced, maintained, dismantled or otherwise  
interfered with by any person not authorised by us.  
- Any repair work must be undertaken by us or our appointed agent.  
- Any parts removed during repair work or any appliance that is replaced become our  
property.  
- The appliance is used in the United Kingdom or Republic of Ireland.  
The guarantee does not cover:  
- Damage resulting from transportation, improper use, neglect or interference or as a  
result of improper installation.  
- Replacement of any consumable item or accessory. These include but are not limited to:  
plugs, cables, batteries, light bulbs, fluorescent tubes and starters, covers and filters.  
- Replacement of any removable parts made of glass or plastic.  
THE GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN  
COMMERCIAL OR NON-DOMESTIC PREMISES.  
Non-Domestic Usage Policy:  
Indesit Company manufactures appliances for domestic use only. We understand that in  
some cases our appliances are used in commercial and/or non-domestic situations. We  
still provide a full 12 month manufacturers’ guarantee, provided the appliance has not been:  
Accidentally damaged - Damage that occurs suddenly as a result of an unexpected and  
non-deliberate external action.  
Maliciously damaged - The deliberate and intentional damage to the product.  
Subjected to misuse - Incorrect or careless or improper use.  
Subjected to overuse - Excessive usage versus that expected of a domestically situated  
appliance.  
5 Year Parts Guarantee  
Hotpoint also offers you a FREE 5 year parts guarantee. This additional guarantee is  
conditional on you registering your appliance with us and the parts being fitted by one  
of our authorised engineers. There will be a charge for our engineer’s time.  
To activate the extra parts warranty on your appliance, simply call our free phone registration line on  
0800 519 2110 (Republic of Ireland 1800 844 347)  
15  
 
195104045. 00 W  
05/2012 - LION fpg . Four Ashes, Wolverhampton  
Extended Guarantees  
We offer a selection of protection plans that enable you to fully cover yourself against the expense  
of repair bills for the life of your policy. To find the ideal plan for you please call our advice line on  
UK: 08448 226 226  
Republic of Ireland: 01 230 0233  
Free Helpdesk Service  
We have a dedicated team who can provide free advice and assistance with your appliance if you  
experience any technical difficulties within the first 90 days of ownership. Simply call our Hotpoint  
Service Hotline on 08448 224 224 (Republic of Ireland 0818 313 413) for telephone assistance,  
or, where necessary, to arrange for an engineer to call.  
After Sales Service  
No one is better placed to care for your Hotpoint appliance during the course of its  
working life than us - the manufacturer.  
Essential Contact Information  
Hotpoint Service  
We are the largest service team in the country offering you access to 400 skilled  
telephone advisors and 1100 fully qualified engineers on call to ensure you receive  
fast, reliable, local service.  
UK: 08448 224 224  
Republic of Ireland: 0818 313 413  
Please note: Our advisors will require the following information:  
Model number  
Serial number  
Parts and Accessories  
We supply a full range of genuine replacement parts as well as accessory products that  
protect and hygienically clean your appliance to keep it looking good and functioning  
efficiently throughout its life.  
UK: 08448 225 225  
Republic of Ireland: 0818 313 413  
Appliance Registration  
We want to give you additional benefits of Hotpoint ownership. To activate your FREE 5 year  
parts guarantee you must register your appliance with us.  
Free phone UK: 0800 519 2110  
Republic of Ireland: 1800 844 347  
Indesit Company UK Limited, Morley Way, Peterborough, PE2 9JB  
Indesit Company, Unit 49 Airways Industrial Estate, Dublin 17  
 

Grizzly Drill H6362 User Manual
Grizzly Router T10115 User Manual
Haier Flat Panel Television HL19K1 User Manual
Haier Flat Panel Television PH 4210D User Manual
Hampton Direct Indoor Fireplace H15 LP1 User Manual
Harbor Freight Tools Automobile Accessories 93228 User Manual
Hayter Mowers Lawn Mower 401R User Manual
HP Hewlett Packard Computer Accessories t2808 90006 User Manual
Husqvarna Snow Blower 14527SB LS User Manual
IBM Portable Media Storage DU3 User Manual